Advanced Aviation Radio Interface Unit (Bluetooth)

Not just a simple radio interface. We use the latest electronic technology to enable us to produce an efficient powered radio interface, with very low power consumption typically only 6mA, and all the features a pilot would require.

User-Configurable Features
Change various selectable features which reconfigure radio type (i.e. from type 'B' [Icom A3] to Type 'BB' [Icom A6]), control intercom volume levels, mute audio levels, and more.

Crystal Clear Audio
The voice reproduction through the intercom unit is very bright and clear, optimised for noisy environments. Connection to the mobile telephone is equally as clear. Audio and mic gain levels can be configured dependent upon what telephone or second radio you are connecting.

Five LED Status Monitors
Fully specified with LED indicators showing power, TX, RX and headset batteries charged.

Connectivity

• Connect an airband radio (panel mount or handheld)
• Second PMR type radio can be connected at the same time for chatting to your flying group
• Mobile telephone connection is a standard feature (lead is optional accessory, MM011)
• Two audio/music inputs and separate audio output for recording
• Twin PTT inputs - when P1 transmits the mic on P2 will mute and vice versa

Power & Configuration

• User can select either 10v (Icom A6 etc) or 12 volt (Icom A3 etc) output to power the radio
• User adjustable maximum intercom volume level and adjustable maximum mic TX level
• Music, second radio, mobile telephone will mute automatically once the master radio receives an incoming signal
• Auxiliary Control output for two colour LED on the instrument panel showing RX and TX (optional accessory)

Smart Battery Management
The interface incorporates a battery monitor that turns the battery charging circuit off when headsets are fully charged, extending the life of the headset batteries. There is a tone bleeper when you first press the PTT switch to indicate the radio transmission.

Compatibility
Our equipment can be connected to a Lynx Micro System or vice versa.
*Interface will not provide voltage to Icom A25.

Inputs/Outputs

• Connect up to two radios at once
• Mobile phone input
• Twin PTT
• Hi Stereo Music Input (PCAS/Music/GPS audio)
• Low Audio input (PCAS/Music/GPS audio)
• Line out recording Output
• Auxiliary LED indicator
• Powers radio from the interface

Features

• Micro Amp power - Typically 3mA per headset connected when using main supply
• Switchable 10v or 12v output for all Icom radios
• Automatic soft audio muting circuit - Mutes second radio, music, & telephone when the master radio receives a transmission
• User adjustable TX mic gain & EQ adjuster, intercom max volume adjuster, muting sensitivity

LED Indicators

• Pilot headset batteries full charge indicator
• Co Pilot headset batteries fully charged indicator
• RX LED
• TX LED
• Ignition power on

Included

• Radio Interface unit
• Ignition Power supply lead
• Stereo Audio input/output lead
• Fixing Kit

The interface comes pre-configured and ready to plug and go.